Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • maxt/CEPCSW
  • zyjonah/CEPCSW
  • wanjw03/CEPCSW
  • yudian2002/CEPCSW
  • starr136a/CEPCSW
  • fucd/CEPCSW
  • shuohan/CEPCSW
  • glliu/CEPCSW
  • zhangjinxian/CEPCSW_20250110
  • zhangyz/CEPCSW
  • shuxian/CEPCSW
  • lihp29/CEPCSW
  • zhangkl/CEPCSW
  • laipz/CEPCSW
  • lizhihao/CEPCSW
  • yudian2002/cepcsw-otk-endcap-update-01
  • xuchj7/CEPCSW
  • wuchonghao9612/CEPCSW
  • chenye/CEPCSW
  • zhangxm/CEPCSW
  • mengwq/CEPCSW
  • yudian2002/cepcsw-geo-upgrade-v-2
  • fangwx/CEPCSW
  • yudian2002/cepcsw-geo-upgrade
  • jiangxj/CEPCSW
  • yudian2002/cepcsw-otk-end-cap-development
  • guolei/CEPCSW
  • chenbp/CEPCSW
  • dhb112358/CEPCSW
  • tangyb/CEPCSW
  • luhc/CEPCSW
  • songwz/cepcsw-tdr
  • yudian2002/cepcsw-ote-development
  • yudian2002/cepcsw-otb-development
  • dudejing/CEPCSW
  • shexin/CEPCSW
  • sunwy/CEPCSW
  • 1810337/CEPCSW
  • cepcsw/CEPCSW
  • tyzhang/CEPCSW
  • fucd/CEPCSW1
  • xiaolin.wang/CEPCSW
  • wangchu/CEPCSW
  • 201840277/CEPCSW
  • zhaog/CEPCSW
  • shihy/cepcsw-dose
  • myliu/CEPCSW
  • thinking/CEPCSW
  • lihn/CEPCSW
  • 221840222/CEPCSW
  • gongjd1119/CEPCSW
  • tanggy/CEPCSW
  • lintao/CEPCSW
  • guofangyi/cepcsw-release
  • shihy/CEPCSW
  • 1365447033/CEPCSW
  • lizhan/CEPCSW
  • shixin/CEPCSW
  • cepc/CEPCSW
59 results
Show changes
Hide whitespace changes
Inline Side-by-side
Showing
with 1387 additions and 40 deletions
Detector/DetCRD/compact/CRD_common_v01/Beampipe_v01_01.xml
View file @ 835ccfde
......@@ -10,56 +10,190 @@
<define>
<constant name="ForkAsymThickness" value="BeamPipe_Dnstream_inner_radius+BeamPipe_Cu_thickness-BeamPipe_Upstream_inner_radius"/>
<constant name="BeamPipe_QD0_zmax" value="3950*mm"/>
<constant name="BeamPipe_QF1_zmin" value="4450*mm"/>
<constant name="BeamPipe_QF1_zmax" value="5910*mm"/>
<constant name="BeamPipe_QF1_inner_radius" value="20.5*mm"/>
<constant name="BeamPipe_Iron_thickness" value="2.5*mm"/>
</define>
<detectors>
<detector name="BeamPipe" type="DD4hep_CRDBeamPipe_v01" vis="BeamPipeVis">
<detector name="BeamPipe" type="CRDBeamPipe_v01" vis="VacVis">
<parameter crossingangle="CrossingAngle" />
<envelope vis="BlueVis">
<envelope>
<shape type="Assembly"/>
</envelope>
<section type ="Center" name="IPInnerTube" zStart="0" zEnd="BeamPipe_CentralBe_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Central_inner_radius"/>
<layer material="G4_Be" thickness="BeamPipe_Be_inner_thickness"/>
<layer material="G4_PARAFFIN" thickness="BeamPipe_Cooling_thickness"/>
<layer material="G4_Be" thickness="BeamPipe_Be_outer_thickness"/>
<layer material="beam" thickness="BeamPipe_Central_inner_radius" vis="VacVis"/>
<layer material="G4_Be" thickness="BeamPipe_Be_inner_thickness" vis="TubeVis"/>
<layer material="G4_PARAFFIN" thickness="BeamPipe_Cooling_thickness" vis="GrayVis"/>
<layer material="G4_Be" thickness="BeamPipe_Be_outer_thickness" vis="TubeVis"/>
</section>
<section type="Center" name="IPAl" zStart="BeamPipe_CentralBe_zmax" zEnd="BeamPipe_CentralAl_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Central_inner_radius"/>
<layer material="G4_Al" thickness="BeamPipe_Al_thickness"/>
<layer material="beam" thickness="BeamPipe_Central_inner_radius" vis="VacVis"/>
<layer material="G4_Al" thickness="BeamPipe_Al_thickness" vis="TubeVis"/>
</section>
<section type="Center" name="ExpandPipe" zStart="BeamPipe_CentralAl_zmax" zEnd="BeamPipe_ConeAl_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Central_inner_radius" thicknessEnd="BeamPipe_Expanded_inner_radius"/>
<layer material="G4_Al" thickness="BeamPipe_Al_thickness" thicknessEnd="BeamPipe_Al_thickness"/>
<layer material="beam" thickness="BeamPipe_Central_inner_radius" thicknessEnd="BeamPipe_Expanded_inner_radius" vis="VacVis"/>
<layer material="G4_Al" thickness="BeamPipe_Al_thickness" thicknessEnd="BeamPipe_Al_thickness" vis="TubeVis"/>
</section>
<section type="Center" name="ThickPipe" zStart="BeamPipe_ConeAl_zmax" zEnd="BeamPipe_LinkerAl_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Expanded_inner_radius"/>
<layer material="G4_Al" thickness="BeamPipe_Al_thickness"/>
<layer material="beam" thickness="BeamPipe_Expanded_inner_radius" vis="VacVis"/>
<layer material="G4_Al" thickness="BeamPipe_Al_thickness" vis="TubeVis"/>
</section>
<section type="CenterSide" name="OutsideLink" zStart="BeamPipe_LinkerAl_zmax" zEnd="BeamPipe_LinkerCu_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Expanded_inner_radius"/>
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness"/>
<layer material="beam" thickness="BeamPipe_Expanded_inner_radius" vis="VacVis"/>
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" vis="TubeVis"/>
</section>
<section type="FatWaist" name="Waist" zStart="BeamPipe_LinkerCu_zmax" zEnd="BeamPipe_Waist_zmax" rStart="BeamPipe_Expanded_inner_radius" size="BeamPipe_Crotch_hole_height">
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness"/>
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" vis="TubeVis"/>
</section>
<!--CrotchAsymUp&CrotchAsymDn not work to fix, because of problem on convert from TGeo to Geant4-->
<!--section type="CrotchAsymUp" name="Fork" zStart="BeamPipe_Waist_zmax" zEnd="BeamPipe_Crotch_zmax"
<section type="CrotchAsymUp" name="Fork" zStart="BeamPipe_Waist_zmax" zEnd="BeamPipe_Crotch_zmax"
rStart="BeamPipe_Expanded_inner_radius" rEnd="BeamPipe_Upstream_inner_radius" size="BeamPipe_Crotch_hole_height">
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" thicknessEnd="ForkAsymThickness"/>
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" thicknessEnd="ForkAsymThickness" vis="TubeVis"/>
</section>
<section type="CrotchAsymDn" name="Fork" zStart="BeamPipe_Waist_zmax" zEnd="BeamPipe_Crotch_zmax"
rStart="BeamPipe_Expanded_inner_radius" rEnd="BeamPipe_Dnstream_inner_radius" size="BeamPipe_Crotch_hole_height">
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness"/>
</section-->
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" vis="TubeVis"/>
</section>
<section type="FlareLegUp" name="FirstDoublePipe" zStart="BeamPipe_Crotch_zmax" zEnd="BeamPipe_FirstSeparated_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Upstream_inner_radius" thicknessEnd="BeamPipe_Dnstream_inner_radius"/>
<layer material="G4_Cu" thickness="ForkAsymThickness" thicknessEnd="BeamPipe_Cu_thickness"/>
<layer material="beam" thickness="BeamPipe_Upstream_inner_radius" thicknessEnd="BeamPipe_Dnstream_inner_radius" vis="VacVis"/>
<layer material="G4_Cu" thickness="ForkAsymThickness" thicknessEnd="BeamPipe_Cu_thickness" vis="TubeVis"/>
</section>
<section type="FlareLegDn" name="FirstDoublePipe" zStart="BeamPipe_Crotch_zmax" zEnd="BeamPipe_FirstSeparated_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Dnstream_inner_radius"/>
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness"/>
<layer material="beam" thickness="BeamPipe_Dnstream_inner_radius" vis="VacVis"/>
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" vis="TubeVis"/>
</section>
<section type="Legs" name="QD0Link" zStart="BeamPipe_FirstSeparated_zmax" zEnd="BeamPipe_SecondSeparated_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Dnstream_inner_radius" vis="VacVis"/>
<layer material="stainless_steel" thickness="BeamPipe_Iron_thickness" vis="TubeVis"/>
</section>
<section type="Legs" name="QD0" zStart="BeamPipe_SecondSeparated_zmax" zEnd="BeamPipe_QD0_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Dnstream_inner_radius" vis="VacVis"/>
<layer material="stainless_steel" thickness="BeamPipe_Iron_thickness" vis="TubeVis"/>
<layer material="G4_Cu" thickness="3.5*mm" vis="TubeVis"/>
<layer material="superconductor" thickness="6.0*mm" vis="MagentaVis"/>
<layer material="stainless_steel" thickness="8.0*mm" vis="ShellVis"/>
</section>
<section type="Legs" name="QF1Link" zStart="BeamPipe_QD0_zmax" zEnd="BeamPipe_QF1_zmin" rStart="0">
<layer material="beam" thickness="BeamPipe_Dnstream_inner_radius" thicknessEnd="BeamPipe_QF1_inner_radius" vis="VacVis"/>
<layer material="stainless_steel" thickness="BeamPipe_Iron_thickness" vis="TubeVis"/>
</section>
<section type="Legs" name="QF1" zStart="BeamPipe_QF1_zmin" zEnd="BeamPipe_QF1_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_QF1_inner_radius" vis="VacVis"/>
<layer material="stainless_steel" thickness="BeamPipe_Iron_thickness" vis="TubeVis"/>
<layer material="G4_Cu" thickness="3.0*mm" vis="TubeVis"/>
<layer material="superconductor" thickness="6.0*mm" vis="MagentaVis"/>
<layer material="stainless_steel" thickness="8.0*mm" vis="ShellVis"/>
</section>
<section type="Legs" name="Farest" zStart="BeamPipe_QF1_zmax" zEnd="BeamPipe_end_z" rStart="0">
<layer material="beam" thickness="BeamPipe_QF1_inner_radius" vis="VacVis"/>
<layer material="stainless_steel" thickness="BeamPipe_Iron_thickness" vis="TubeVis"/>
</section>
<!-- Magnets and their cooling, support -->
<section type="CenterSide" name="Magnet_1" zStart="1160*mm" zEnd="1900*mm" rStart="90*mm">
<layer material="superconductor" thickness="20*mm" vis="MagentaVis"/>
</section>
<section type="CenterSide" name="Magnet_2" zStart="1930*mm" zEnd="3964*mm" rStart="120*mm">
<layer material="superconductor" thickness="10*mm" vis="MagentaVis"/>
</section>
<section type="CenterSide" name="Magnet_3" zStart="3970*mm" zEnd="7000*mm" rStart="185*mm">
<layer material="superconductor" thickness="10*mm" vis="MagentaVis"/>
</section>
<section type="CenterSide" name="MagnetShell_1" zStart="970*mm" zEnd="1110*mm" rStart="31*mm">
<layer material="stainless_steel" thickness="1.5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetShell_2" zStart="1110*mm" zEnd="1115*mm" rStart="50.0*mm">
<layer material="stainless_steel" thickness="91.25*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetShell_3" zStart="1115*mm" zEnd="1900*mm" rStart="130.75*mm" rEnd="175*mm">
<layer material="stainless_steel" thickness="10.5*mm" thicknessEnd="65*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetShell_4" zStart="1900*mm" zEnd="3800*mm" rStart="175*mm">
<layer material="stainless_steel" thickness="65*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetShell_5" zStart="3800*mm" zEnd="3910*mm" rStart="175*mm">
<layer material="stainless_steel" thickness="135*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetShell_6" zStart="3910*mm" zEnd="7160*mm" rStart="240*mm">
<layer material="stainless_steel" thickness="70*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_1" zStart="1130*mm" zEnd="1135*mm" rStart="75*mm">
<layer material="stainless_steel" thickness="50*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_2i" zStart="1135*mm" zEnd="1925*mm" rStart="75*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_2o" zStart="1135*mm" zEnd="1900*mm" rStart="120*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_3l" zStart="1900*mm" zEnd="1905*mm" rStart="120*mm">
<layer material="stainless_steel" thickness="25*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_3r" zStart="1925*mm" zEnd="1930*mm" rStart="75*mm">
<layer material="stainless_steel" thickness="35*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_4i" zStart="1930*mm" zEnd="4000*mm" rStart="105*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_4o" zStart="1905*mm" zEnd="3940*mm" rStart="140*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_5l" zStart="3940*mm" zEnd="3945*mm" rStart="140*mm">
<layer material="stainless_steel" thickness="70*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_5r" zStart="4000*mm" zEnd="4005*mm" rStart="105*mm">
<layer material="stainless_steel" thickness="70*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_6i" zStart="4005*mm" zEnd="7050*mm" rStart="170*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_6o" zStart="3945*mm" zEnd="7050*mm" rStart="205*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_7" zStart="7050*mm" zEnd="7055*mm" rStart="170*mm">
<layer material="stainless_steel" thickness="40*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_1l" zStart="1135*mm" zEnd="1160*mm" rStart="80*mm">
<layer material="lN2" thickness="40*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_1i" zStart="1160*mm" zEnd="1900*mm" rStart="80*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_1o" zStart="1160*mm" zEnd="1900*mm" rStart="110*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_1r" zStart="1900*mm" zEnd="1925*mm" rStart="80*mm">
<layer material="lN2" thickness="40*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_2l" zStart="1905*mm" zEnd="1930*mm" rStart="120*mm">
<layer material="lN2" thickness="20*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_2i" zStart="1925*mm" zEnd="3964*mm" rStart="110*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_2o" zStart="1930*mm" zEnd="3945*mm" rStart="130*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_2r1" zStart="3964*mm" zEnd="4000*mm" rStart="110*mm">
<layer material="lN2" thickness="65*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_2r2" zStart="3945*mm" zEnd="3964*mm" rStart="130*mm">
<layer material="lN2" thickness="45*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_3l" zStart="3945*mm" zEnd="3970*mm" rStart="175*mm">
<layer material="lN2" thickness="30*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_3i" zStart="3970*mm" zEnd="7000*mm" rStart="175*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_3o" zStart="3970*mm" zEnd="7000*mm" rStart="195*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_3r" zStart="7000*mm" zEnd="7050*mm" rStart="175*mm">
<layer material="lN2" thickness="30*mm" vis="BlueVis"/>
</section>
</detector>
</detectors>
......
Detector/DetCRD/compact/CRD_common_v01/Beampipe_v01_02.xml 0 → 100644
View file @ 835ccfde
<lccdd>
<info name="CRD" title="CRD Beam pipe" author="Chengdong Fu" url="no" status="development" version="1.0">
<comment>A beampipe for CRD</comment>
</info>
<display>
<vis name="TubeVis" alpha="0.1" r="1.0" g="0.7" b="0.5" showDaughters="true" visible="true"/>
<vis name="VacVis" alpha="1.0" r="0.0" g="0.0" b="0.0" showDaughters="true" visible="false"/>
</display>
<define>
<!--only needed for asymetry double pipe-->
<!--constant name="ForkAsymThickness" value="BeamPipe_Dnstream_inner_radius+BeamPipe_Cu_thickness-BeamPipe_Upstream_inner_radius"/-->
<constant name="BeamPipe_QD0_zmax" value="3950*mm"/>
<constant name="BeamPipe_QF1_zmin" value="4450*mm"/>
<constant name="BeamPipe_QF1_zmax" value="5910*mm"/>
<constant name="BeamPipe_QF1_inner_radius" value="20.5*mm"/>
<constant name="BeamPipe_Iron_thickness" value="2.5*mm"/>
</define>
<detectors>
<detector name="BeamPipe" type="CRDBeamPipe_v01" vis="VacVis">
<parameter crossingangle="CrossingAngle" />
<envelope>
<shape type="Assembly"/>
</envelope>
<section type ="Center" name="IPInnerTube" zStart="0" zEnd="BeamPipe_CentralBe_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Central_inner_radius" vis="VacVis"/>
<layer material="G4_Be" thickness="BeamPipe_Be_inner_thickness" vis="TubeVis"/>
<layer material="G4_PARAFFIN" thickness="BeamPipe_Cooling_thickness" vis="GrayVis"/>
<layer material="G4_Be" thickness="BeamPipe_Be_outer_thickness" vis="TubeVis"/>
</section>
<section type="Center" name="IPAl" zStart="BeamPipe_CentralBe_zmax" zEnd="BeamPipe_CentralAl_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Central_inner_radius" vis="VacVis"/>
<layer material="G4_Al" thickness="BeamPipe_Al_thickness" vis="TubeVis"/>
</section>
<section type="Waist" name="Waist1st" zStart="BeamPipe_CentralAl_zmax" zEnd="BeamPipe_ExpandAl_zmax" rStart="BeamPipe_Central_inner_radius" size="BeamPipe_FirstExpand_width">
<layer material="G4_Al" thickness="BeamPipe_Al_thickness" vis="TubeVis"/>
</section>
<section type="Runway" name="Waist2nd" zStart="BeamPipe_ExpandAl_zmax" zEnd="BeamPipe_Linker_zmin" rStart="BeamPipe_Central_inner_radius" size="BeamPipe_FirstExpand_width">
<layer material="G4_Al" thickness="BeamPipe_Al_thickness" vis="TubeVis"/>
</section>
<section type="Runway" name="Waist3rd" zStart="BeamPipe_Linker_zmin" zEnd="BeamPipe_Linker_zmax" rStart="BeamPipe_Central_inner_radius" size="BeamPipe_FirstExpand_width">
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" vis="TubeVis"/>
</section>
<section type="Runway" name="Waist4th" zStart="BeamPipe_Linker_zmax" zEnd="BeamPipe_Waist_zmax" rStart="BeamPipe_Central_inner_radius" size="BeamPipe_FirstExpand_width"
shift="BeamPipe_SecondExpand_width-BeamPipe_FirstExpand_width">
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" vis="TubeVis"/>
</section>
<section type="Crotch" name="Fork" zStart="BeamPipe_Waist_zmax" zEnd="BeamPipe_Crotch_zmax"
rStart="BeamPipe_Central_inner_radius" rEnd="BeamPipe_Central_inner_radius" size="BeamPipe_SecondExpand_width">
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" vis="TubeVis"/>
</section>
<section type="Legs" name="FirstDoublePipe" zStart="BeamPipe_Crotch_zmax" zEnd="BeamPipe_FirstSeparated_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Fork_inner_radius" vis="VacVis"/>
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" vis="TubeVis"/>
</section>
<section type="Legs" name="BeforeMask" zStart="BeamPipe_FirstSeparated_zmax" zEnd="BeamPipe_Mask_zmin" rStart="0">
<layer material="beam" thickness="BeamPipe_Fork_inner_radius" vis="VacVis"/>
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" vis="TubeVis"/>
</section>
<section type="Legs" name="Mask" zStart="BeamPipe_Mask_zmin" zEnd="BeamPipe_Mask_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Mask_inner_radius" vis="VacVis"/>
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness+BeamPipe_Fork_inner_radius-BeamPipe_Mask_inner_radius" vis="TubeVis"/>
</section>
<section type="Legs" name="SecondDoublePipe" zStart="BeamPipe_Mask_zmax" zEnd="BeamPipe_SecondSeparated_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Fork_inner_radius" vis="VacVis"/>
<layer material="G4_Cu" thickness="BeamPipe_Cu_thickness" vis="TubeVis"/>
</section>
<section type="Legs" name="QD0" zStart="BeamPipe_SecondSeparated_zmax" zEnd="BeamPipe_QD0_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_Fork_inner_radius" vis="VacVis"/>
<layer material="stainless_steel" thickness="BeamPipe_Iron_thickness" vis="TubeVis"/>
<layer material="G4_Cu" thickness="3.5*mm" vis="TubeVis"/>
<layer material="superconductor" thickness="6.0*mm" vis="MagentaVis"/>
<layer material="stainless_steel" thickness="8.0*mm" vis="ShellVis"/>
</section>
<section type="Legs" name="QF1Linker" zStart="BeamPipe_QD0_zmax" zEnd="BeamPipe_QF1_zmin" rStart="0">
<layer material="beam" thickness="BeamPipe_Fork_inner_radius" thicknessEnd="BeamPipe_QF1_inner_radius" vis="VacVis"/>
<layer material="stainless_steel" thickness="BeamPipe_Iron_thickness" vis="TubeVis"/>
</section>
<section type="Legs" name="QF1" zStart="BeamPipe_QF1_zmin" zEnd="BeamPipe_QF1_zmax" rStart="0">
<layer material="beam" thickness="BeamPipe_QF1_inner_radius" vis="VacVis"/>
<layer material="stainless_steel" thickness="BeamPipe_Iron_thickness" vis="TubeVis"/>
<layer material="G4_Cu" thickness="3.0*mm" vis="TubeVis"/>
<layer material="superconductor" thickness="6.0*mm" vis="MagentaVis"/>
<layer material="stainless_steel" thickness="8.0*mm" vis="ShellVis"/>
</section>
<section type="Legs" name="Farest" zStart="BeamPipe_QF1_zmax" zEnd="BeamPipe_end_z" rStart="0">
<layer material="beam" thickness="BeamPipe_QF1_inner_radius" vis="VacVis"/>
<layer material="stainless_steel" thickness="BeamPipe_Iron_thickness" vis="TubeVis"/>
</section>
<!-- Magnets and their cooling, support -->
<section type="CenterSide" name="Magnet_1" zStart="1160*mm" zEnd="1900*mm" rStart="90*mm">
<layer material="superconductor" thickness="20*mm" vis="MagentaVis"/>
</section>
<section type="CenterSide" name="Magnet_2" zStart="1930*mm" zEnd="3964*mm" rStart="120*mm">
<layer material="superconductor" thickness="10*mm" vis="MagentaVis"/>
</section>
<section type="CenterSide" name="Magnet_3" zStart="3970*mm" zEnd="7000*mm" rStart="185*mm">
<layer material="superconductor" thickness="10*mm" vis="MagentaVis"/>
</section>
<!--TO DO: overlap with Lumical-->
<!--section type="CenterSide" name="MagnetShell_1" zStart="970*mm" zEnd="1110*mm" rStart="33*mm">
<layer material="stainless_steel" thickness="1.5*mm" vis="ShellVis"/>
</section-->
<section type="CenterSide" name="MagnetShell_2" zStart="1110*mm" zEnd="1115*mm" rStart="50.0*mm">
<layer material="stainless_steel" thickness="91.25*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetShell_3" zStart="1115*mm" zEnd="1900*mm" rStart="130.75*mm" rEnd="175*mm">
<layer material="stainless_steel" thickness="10.5*mm" thicknessEnd="65*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetShell_4" zStart="1900*mm" zEnd="3800*mm" rStart="175*mm">
<layer material="stainless_steel" thickness="65*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetShell_5" zStart="3800*mm" zEnd="3910*mm" rStart="175*mm">
<layer material="stainless_steel" thickness="135*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetShell_6" zStart="3910*mm" zEnd="7160*mm" rStart="240*mm">
<layer material="stainless_steel" thickness="70*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_1" zStart="1130*mm" zEnd="1135*mm" rStart="75*mm">
<layer material="stainless_steel" thickness="50*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_2i" zStart="1135*mm" zEnd="1925*mm" rStart="75*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_2o" zStart="1135*mm" zEnd="1900*mm" rStart="120*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_3l" zStart="1900*mm" zEnd="1905*mm" rStart="120*mm">
<layer material="stainless_steel" thickness="25*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_3r" zStart="1925*mm" zEnd="1930*mm" rStart="75*mm">
<layer material="stainless_steel" thickness="35*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_4i" zStart="1930*mm" zEnd="4000*mm" rStart="105*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_4o" zStart="1905*mm" zEnd="3940*mm" rStart="140*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_5l" zStart="3940*mm" zEnd="3945*mm" rStart="140*mm">
<layer material="stainless_steel" thickness="70*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_5r" zStart="4000*mm" zEnd="4005*mm" rStart="105*mm">
<layer material="stainless_steel" thickness="70*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_6i" zStart="4005*mm" zEnd="7050*mm" rStart="170*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_6o" zStart="3945*mm" zEnd="7050*mm" rStart="205*mm">
<layer material="stainless_steel" thickness="5*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetSupport_7" zStart="7050*mm" zEnd="7055*mm" rStart="170*mm">
<layer material="stainless_steel" thickness="40*mm" vis="ShellVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_1l" zStart="1135*mm" zEnd="1160*mm" rStart="80*mm">
<layer material="lN2" thickness="40*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_1i" zStart="1160*mm" zEnd="1900*mm" rStart="80*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_1o" zStart="1160*mm" zEnd="1900*mm" rStart="110*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_1r" zStart="1900*mm" zEnd="1925*mm" rStart="80*mm">
<layer material="lN2" thickness="40*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_2l" zStart="1905*mm" zEnd="1930*mm" rStart="120*mm">
<layer material="lN2" thickness="20*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_2i" zStart="1925*mm" zEnd="3964*mm" rStart="110*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_2o" zStart="1930*mm" zEnd="3945*mm" rStart="130*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_2r1" zStart="3964*mm" zEnd="4000*mm" rStart="110*mm">
<layer material="lN2" thickness="65*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_2r2" zStart="3945*mm" zEnd="3964*mm" rStart="130*mm">
<layer material="lN2" thickness="45*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_3l" zStart="3945*mm" zEnd="3970*mm" rStart="175*mm">
<layer material="lN2" thickness="30*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_3i" zStart="3970*mm" zEnd="7000*mm" rStart="175*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_3o" zStart="3970*mm" zEnd="7000*mm" rStart="195*mm">
<layer material="lN2" thickness="10*mm" vis="BlueVis"/>
</section>
<section type="CenterSide" name="MagnetCooling_3r" zStart="7000*mm" zEnd="7050*mm" rStart="175*mm">
<layer material="lN2" thickness="30*mm" vis="BlueVis"/>
</section>
</detector>
</detectors>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/Coil_Simple_v01_01.xml
View file @ 835ccfde
<lccdd>
<detectors>
<detector name="Coil" type="SCoil02" vis="SOLVis" id="DetID_COIL" insideTrackingVolume="false" readout="COILCollection">
<envelope vis="SeeThrough">
<shape type="Tube" rmin="Solenoid_inner_radius" rmax="Solenoid_outer_radius" dz="Solenoid_half_length" material="Air"/>
<detector name="Coil" type="DD4hep_Solenoid_o1_v01" id="DetID_COIL" insideTrackingVolume="false" readout="COILCollection">
<envelope>
<shape type="Tube" rmin="Solenoid_inner_radius" rmax="Solenoid_outer_radius" dz="Solenoid_half_length" material="Vacuum"/>
</envelope>
<type_flags type=" DetType_SUPPORT + DetType_COIL " />
<!--fg: for now only a simple aluminum cylinder is created inside the envelope -->
<tube rmin="Solenoid_inner_radius" rmax="Solenoid_outer_radius" dz="Solenoid_half_length" material="G4_Al"/>
<!-- slice can put as sensitive (tracker type), currently without sensitive, so COILCollection is null -->
<layer id="0" inner_r="Solenoid_inner_radius" outer_z="Solenoid_half_length" vis="SeeThrough">
<slice material="g10" thickness="3*mm" vis="SOLVis"/>
<slice material="Vacuum" thickness="6*mm" vis="Invisible"/>
<slice material="G4_Al" thickness="6*mm" vis="SOLVis"/>
</layer>
<layer id="1" inner_r="SolenoidCoil_radius" outer_z="Solenoid_half_length" vis="SeeThrough">
<slice material="G4_Al" thickness="55*mm" vis="SOLVis"/>
</layer>
<layer id="2" inner_r="Solenoid_outer_radius-27*mm" outer_z="Solenoid_half_length" vis="SeeThrough">
<slice material="G4_Al" thickness="6*mm" vis="SOLVis"/>
<slice material="Vacuum" thickness="6*mm" vis="Invisible"/>
<slice material="G4_Al" thickness="15*mm" vis="SOLVis"/>
</layer>
</detector>
</detectors>
<readouts>
<readout name="COILCollection">
<id>system:5,side:-2,layer:9,module:8,sensor:8,barrelside:-2</id>
<id>system:5,side:-2,layer:9,slice:8,sensor:8,barrelside:-2</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/ConcreteWall_v01_01.xml 0 → 100644
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<define>
<constant name="concrete_position_z" value="592.5*cm"/>
<constant name="concrete_hole_rmin" value="65*cm"/>
<constant name="concrete_wall_size" value="520*cm"/>
<constant name="concrete_wall_hz" value="50*cm"/>
</define>
<detectors>
<detector name="ConcreteWall" type="ConcreteWall_v01" vis="VisibleBrown" material="Concrete">
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
<position x="0" y="0" z="concrete_position_z"/>
<dimensions rmax="concrete_wall_size" rmin="concrete_hole_rmin" dz="concrete_wall_hz"/>
</detector>
</detectors>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/DC_Simple_v01_03.xml 0 → 100644
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<info name="DriftChamber"
title="Test with Drift Chamber"
author="Tao Lin"
url="http://github.com/cepc/CEPCSW"
status="development"
version="v0">
<comment>Test with Drift Chamber</comment>
</info>
<define>
<constant name="DC_layer_number" value="100"/>
<constant name="Alpha" value="12*deg"/>
<constant name="Gas_radius_min" value="DC_rbegin+DC_inner_wall_thickness+DC_safe_distance"/>
<constant name="Gas_half_length" value="DC_half_length-DC_Endcap_dz-DC_safe_distance"/>
<constant name="Gas_length" value="Gas_half_length*2"/>
<constant name="DC_cell_width" value="10*mm"/>
<constant name="DC_inner_wall_radius_min" value="DC_rbegin"/>
<constant name="DC_inner_wall_radius_max" value="DC_rbegin+DC_inner_wall_thickness"/>
<constant name="DC_Endcap_rmin" value="DC_rbegin"/>
<constant name="DC_Endcap_rmax" value="DC_rend"/>
<constant name="DC_construct_wire" value="1"/>
<constant name="DC_layer_width" value="9.57687*mm"/>
</define>
<limits>
<limitset name="DC_limits">
<limit name="step_length_max" particles="*" value="0.1" unit="mm" />
</limitset>
</limits>
<regions>
<region name="DriftChamberRegion">
</region>
</regions>
<detectors>
<detector id="DetID_DC" name="DriftChamber" type="DriftChamber" readout="DriftChamberHitsCollection" vis="DCVis" sensitive="true" region="DriftChamberRegion" limits="DC_limits">
<material name="Air"/>
<chamber id="0" material="GasHe_90Isob_10"/>
<side material="CarbonFiber"/>
<envelope vis="SeeThrough">
<shape type="BooleanShape" operation="Union" material="Air">
<shape type="Tube" rmin="DC_rbegin" rmax="DC_rend" dz="DC_half_length" />
</shape>
</envelope>
<module id="0" name="SignalWire" type="Tube" rmin="0*mm" rmax="0.01*mm" vis="RedVis">
<tubs name="W" type="Tube" rmin="0*mm" rmax="0.007*mm" material="Tungsten"/>
<tubs name="Au" type="Tube" rmin="0.007*mm" rmax="0.01*mm" material="Gold"/>
</module>
<module id="1" name="FieldWire" type="Tube" rmin="0*mm" rmax="0.02*mm" vis="GreenVis">
<tubs name="Al" type="Tube" rmin="0*mm" rmax="0.017*mm" material="Aluminum"/>
<tubs name="Ag" type="Tube" rmin="0.017*mm" rmax="0.02*mm" material="Silver"/>
</module>
<type_flags type="DetType_TRACKER + DetType_BARREL + DetType_GASEOUS + DetType_WIRE"/>
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
<sensitive type="SimpleDriftChamber"/>
</detector>
</detectors>
<readouts>
<readout name="DriftChamberHitsCollection">
<segmentation type="GridDriftChamber" cell_size="DC_cell_width" detector_length="Gas_length" identifier_phi="cellID" layerID="layer" DC_rbegin="DC_rbegin" DC_rend="DC_rend" layer_width="DC_layer_width"/>
<id>system:5,layer:7:9,chamber:8,cellID:32:16</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/DC_Simple_v01_05.xml 0 → 100644
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<info name="DriftChamber"
title="Test with Drift Chamber"
author="Tao Lin"
url="http://github.com/cepc/CEPCSW"
status="development"
version="v0">
<comment>Test with Drift Chamber</comment>
</info>
<define>
<constant name="DC_layer_number" value="55"/>
<constant name="Alpha" value="12*deg"/>
<constant name="Gas_radius_min" value="DC_rbegin+DC_inner_wall_thickness+DC_safe_distance"/>
<constant name="Gas_half_length" value="DC_half_length-DC_Endcap_dz-DC_safe_distance"/>
<constant name="Gas_length" value="Gas_half_length*2"/>
<constant name="DC_cell_width" value="18*mm"/>
<constant name="DC_inner_wall_radius_min" value="DC_rbegin"/>
<constant name="DC_inner_wall_radius_max" value="DC_rbegin+DC_inner_wall_thickness"/>
<constant name="DC_Endcap_rmin" value="DC_rbegin"/>
<constant name="DC_Endcap_rmax" value="DC_rend"/>
<constant name="DC_construct_wire" value="0"/>
<constant name="DC_layer_width" value="18*mm"/>
</define>
<limits>
<limitset name="DC_limits">
<limit name="step_length_max" particles="*" value="0.1" unit="mm" />
</limitset>
</limits>
<regions>
<region name="DriftChamberRegion">
</region>
</regions>
<detectors>
<detector id="DetID_DC" name="DriftChamber" type="DriftChamber" readout="DriftChamberHitsCollection" vis="DCVis" sensitive="true" limits="DC_limits">
<material name="Air"/>
<chamber id="0" material="GasHe_90Isob_10"/>
<side material="CarbonFiber"/>
<envelope vis="SeeThrough">
<shape type="BooleanShape" operation="Union" material="Air">
<shape type="Tube" rmin="DC_rbegin" rmax="DC_rend" dz="DC_half_length" />
</shape>
</envelope>
<module id="0" name="SignalWire" type="Tube" rmin="0*mm" rmax="0.01*mm" vis="RedVis">
<tubs name="W" type="Tube" rmin="0*mm" rmax="0.007*mm" material="Tungsten"/>
<tubs name="Au" type="Tube" rmin="0.007*mm" rmax="0.01*mm" material="Gold"/>
</module>
<module id="1" name="FieldWire" type="Tube" rmin="0*mm" rmax="0.02*mm" vis="GreenVis">
<tubs name="Al" type="Tube" rmin="0*mm" rmax="0.017*mm" material="Aluminum"/>
<tubs name="Ag" type="Tube" rmin="0.017*mm" rmax="0.02*mm" material="Silver"/>
</module>
<type_flags type="DetType_TRACKER + DetType_BARREL + DetType_GASEOUS + DetType_WIRE"/>
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
<sensitive type="SimpleDriftChamber"/>
</detector>
</detectors>
<readouts>
<readout name="DriftChamberHitsCollection">
<segmentation type="GridDriftChamber" cell_size="DC_cell_width" detector_length="Gas_length" identifier_phi="cellID" layerID="layer" DC_rbegin="DC_rbegin" DC_rend="DC_rend" layer_width="DC_layer_width"/>
<id>system:5,layer:7:9,chamber:8,cellID:32:16</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/DC_Simple_v01_06.xml 0 → 100644
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<info name="DriftChamber"
title="Test with Drift Chamber"
author="Tao Lin"
url="http://github.com/cepc/CEPCSW"
status="development"
version="v0">
<comment>Test with Drift Chamber</comment>
</info>
<define>
<constant name="DC_layer_number" value="66"/>
<constant name="Alpha" value="12*deg"/>
<constant name="Gas_radius_min" value="DC_rbegin+DC_inner_wall_thickness+DC_safe_distance"/>
<constant name="Gas_half_length" value="DC_half_length-DC_Endcap_dz-DC_safe_distance"/>
<constant name="Gas_length" value="Gas_half_length*2"/>
<constant name="DC_cell_width" value="18*mm"/>
<constant name="DC_inner_wall_radius_min" value="DC_rbegin"/>
<constant name="DC_inner_wall_radius_max" value="DC_rbegin+DC_inner_wall_thickness"/>
<constant name="DC_Endcap_rmin" value="DC_rbegin"/>
<constant name="DC_Endcap_rmax" value="DC_rend"/>
<constant name="DC_construct_wire" value="0"/>
<constant name="DC_layer_width" value="18*mm"/>
</define>
<limits>
<limitset name="DC_limits">
<limit name="step_length_max" particles="*" value="0.1" unit="mm" />
</limitset>
</limits>
<regions>
<region name="DriftChamberRegion">
</region>
</regions>
<detectors>
<detector id="DetID_DC" name="DriftChamber" type="DriftChamber" readout="DriftChamberHitsCollection" vis="DCVis" sensitive="true" limits="DC_limits">
<material name="Air"/>
<chamber id="0" material="GasHe_90Isob_10"/>
<side material="CarbonFiber"/>
<envelope vis="SeeThrough">
<shape type="BooleanShape" operation="Union" material="Air">
<shape type="Tube" rmin="DC_rbegin" rmax="DC_rend" dz="DC_half_length" />
</shape>
</envelope>
<module id="0" name="SignalWire" type="Tube" rmin="0*mm" rmax="0.01*mm" vis="RedVis">
<tubs name="W" type="Tube" rmin="0*mm" rmax="0.007*mm" material="Tungsten"/>
<tubs name="Au" type="Tube" rmin="0.007*mm" rmax="0.01*mm" material="Gold"/>
</module>
<module id="1" name="FieldWire" type="Tube" rmin="0*mm" rmax="0.03*mm" vis="GreenVis">
<tubs name="Al" type="Tube" rmin="0*mm" rmax="0.027*mm" material="Aluminum"/>
<tubs name="Ag" type="Tube" rmin="0.027*mm" rmax="0.03*mm" material="Silver"/>
</module>
<type_flags type="DetType_TRACKER + DetType_BARREL + DetType_GASEOUS + DetType_WIRE"/>
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
<sensitive type="SimpleDriftChamber"/>
</detector>
</detectors>
<readouts>
<readout name="DriftChamberHitsCollection">
<segmentation type="GridDriftChamber" cell_size="DC_cell_width" detector_length="Gas_length" identifier_phi="cellID" layerID="layer" DC_rbegin="DC_rbegin" DC_rend="DC_rend" layer_width="DC_layer_width"/>
<id>system:5,layer:7:9,chamber:8,cellID:32:16</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/DC_Stero_v01_01.xml 0 → 100644
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<info name="DriftChamber"
title="Test with Drift Chamber"
author="Tao Lin"
url="http://github.com/cepc/CEPCSW"
status="development"
version="v0">
<comment>Test with Drift Chamber</comment>
</info>
<define>
<!-- SDT -->
<constant name="SDT_radius_min" value="DC_inner_radius"/>
<constant name="SDT_radius_max" value="DC_outer_radius"/>
<constant name="SDT_half_length" value="MainTracker_half_length"/>
<constant name="DC_length" value="DC_half_length*2"/>
<constant name="SDT_length" value="SDT_half_length*2"/>
<constant name="SDT_chamber_radius_min" value="DC_chamber_layer_rbegin-DC_safe_distance"/>
<constant name="SDT_chamber_radius_max" value="DC_chamber_layer_rend+DC_chamber_safe_distance+DC_safe_distance"/>
<constant name="SDT_chamber_half_length" value="DC_half_length"/>
<constant name="SDT_chamber_layer_width" value="10*mm"/>
<constant name="SDT_chamber_cell_width" value="10*mm"/>
<constant name="Alpha" value="12*deg"/>
<constant name="SDT_chamber_inner_wall_radius_min" value="SDT_chamber_radius_min-SDT_inner_wall_thickness"/>
<constant name="SDT_chamber_inner_wall_radius_max" value="SDT_chamber_radius_min"/>
<constant name="SDT_chamber_outer_wall_radius_min" value="SDT_chamber_radius_max"/>
<constant name="SDT_chamber_outer_wall_radius_max" value="SDT_chamber_radius_max+SDT_outer_wall_thickness"/>
<constant name="DC_Endcap_rmin" value="SDT_radius_min"/>
<constant name="DC_Endcap_rmax" value="SDT_radius_max"/>
</define>
<limits>
<limitset name="DC_limits">
<limit name="step_length_max" particles="*" value="0.1" unit="mm" />
</limitset>
</limits>
<regions>
<region name="DriftChamberRegion">
<limitsetref name="DC_limits"/>
</region>
</regions>
<detectors>
<detector id="DetID_DC" name="DriftChamber_Stero" type="DriftChamber_Stero" readout="DriftChamberHitsCollection" vis="DCVis" sensitive="true" insideTrackingVolume="true" limits="DC_limits">
<material name="Air"/>
<chamber id="0" material="GasHe_90Isob_10"/>
<side material="CarbonFiber"/>
<envelope vis="SeeThrough">
<shape type="BooleanShape" operation="Union" material="Air">
<shape type="Tube" rmin="SDT_radius_min" rmax="SDT_radius_max" dz="SDT_half_length" />
</shape>
</envelope>
<module id="0" name="SignalWire" type="Tube" rmin="0*mm" rmax="0.01*mm" vis="RedVis">
<tubs name="W" type="Tube" rmin="0*mm" rmax="0.007*mm" material="Tungsten"/>
<tubs name="Au" type="Tube" rmin="0.007*mm" rmax="0.01*mm" material="Gold"/>
</module>
<module id="1" name="FieldWire" type="Tube" rmin="0*mm" rmax="0.02*mm" vis="GreenVis">
<tubs name="Al" type="Tube" rmin="0*mm" rmax="0.017*mm" material="Aluminum"/>
<tubs name="Ag" type="Tube" rmin="0.017*mm" rmax="0.02*mm" material="Silver"/>
</module>
<type_flags type="DetType_TRACKER + DetType_BARREL + DetType_GASEOUS + DetType_WIRE"/>
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
<sensitive type="SimpleDriftChamber"/>
</detector>
</detectors>
<readouts>
<readout name="DriftChamberHitsCollection">
<segmentation type="GridDriftChamber" cell_size="SDT_chamber_cell_width" detector_length="DC_length" identifier_phi="cellID" DC_rbegin="DC_chamber_layer_rbegin" DC_rend="DC_chamber_layer_rend" DC_rmin="SDT_chamber_radius_min" DC_rmax="SDT_chamber_radius_max" safe_distance="DC_safe_distance" layerID="layer" layer_width="SDT_chamber_layer_width"/>
<id>system:5,layer:7:9,chamber:8,cellID:32:16</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/DC_Simple_v01_01.xml → Detector/DetCRD/compact/CRD_common_v01/DC_Straight_v01_01.xml
View file @ 835ccfde
......@@ -28,7 +28,7 @@
<constant name="SDT_chamber_layer_width" value="10*mm"/>
<constant name="SDT_chamber_cell_width" value="10*mm"/>
<constant name="Epsilon" value="0*deg"/>
<constant name="Alpha" value="0*deg"/>
<constant name="SDT_chamber_inner_wall_radius_min" value="SDT_chamber_radius_min-SDT_inner_wall_thickness"/>
<constant name="SDT_chamber_inner_wall_radius_max" value="SDT_chamber_radius_min"/>
......@@ -42,7 +42,7 @@
<limits>
<limitset name="DC_limits">
<limit name="step_length_max" particles="*" value="0.5" unit="mm" />
<limit name="step_length_max" particles="*" value="0.1" unit="mm" />
</limitset>
</limits>
......@@ -53,7 +53,9 @@
<detectors>
<detector id="DetID_DC" name="DriftChamber" type="DriftChamber" readout="DriftChamberHitsCollection" vis="DCVis" sensitive="true" region="DriftChamberRegion" limits="DC_limits">
<chamber id="0"/>
<material name="Air"/>
<chamber id="0" material="GasHe_90Isob_10"/>
<side material="CarbonFiber"/>
<envelope vis="SeeThrough">
<shape type="BooleanShape" operation="Union" material="Air">
<shape type="Tube" rmin="SDT_radius_min" rmax="SDT_radius_max" dz="SDT_half_length" />
......@@ -78,7 +80,7 @@
<readouts>
<readout name="DriftChamberHitsCollection">
<segmentation type="GridDriftChamber" cell_size="SDT_chamber_cell_width" epsilon0="Epsilon" detector_length="DC_length" identifier_phi="cellID" DC_rbegin="DC_chamber_layer_rbegin" DC_rend="DC_chamber_layer_rend" DC_rmin="SDT_chamber_radius_min" DC_rmax="SDT_chamber_radius_max" safe_distance="DC_safe_distance" layerID="layer" layer_width="SDT_chamber_layer_width"/>
<segmentation type="GridDriftChamber" cell_size="SDT_chamber_cell_width" detector_length="DC_length" identifier_phi="cellID" DC_rbegin="DC_chamber_layer_rbegin" DC_rend="DC_chamber_layer_rend" DC_rmin="SDT_chamber_radius_min" DC_rmax="SDT_chamber_radius_max" safe_distance="DC_safe_distance" layerID="layer" layer_width="SDT_chamber_layer_width"/>
<!-- <id>system:8,chamber:1,layer:8,cellID:16</id> -->
<id>system:5,layer:7:9,chamber:8,cellID:32:16</id>
......
Detector/DetCRD/compact/CRD_common_v01/DC_Straight_v01_02.xml 0 → 100644
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd xmlns:compact="http://www.lcsim.org/schemas/compact/1.0"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xs:noNamespaceSchemaLocation="http://www.lcsim.org/schemas/compact/1.0/compact.xsd">
<info name="DriftChamber"
title="Test with Drift Chamber"
author="Tao Lin"
url="http://github.com/cepc/CEPCSW"
status="development"
version="v0">
<comment>Test with Drift Chamber</comment>
</info>
<define>
<!-- SDT -->
<constant name="SDT_radius_min" value="DC_inner_radius"/>
<constant name="SDT_radius_max" value="DC_outer_radius"/>
<constant name="SDT_half_length" value="MainTracker_half_length"/>
<constant name="DC_length" value="DC_half_length*2"/>
<constant name="SDT_length" value="SDT_half_length*2"/>
<constant name="SDT_chamber_radius_min" value="DC_chamber_layer_rbegin-DC_safe_distance"/>
<constant name="SDT_chamber_radius_max" value="DC_chamber_layer_rend+DC_safe_distance"/>
<constant name="SDT_chamber_half_length" value="DC_half_length"/>
<constant name="SDT_chamber_layer_width" value="10*mm"/>
<constant name="SDT_chamber_cell_width" value="10*mm"/>
<constant name="Alpha" value="0*deg"/>
<constant name="SDT_chamber_inner_wall_radius_min" value="SDT_chamber_radius_min-SDT_inner_wall_thickness"/>
<constant name="SDT_chamber_inner_wall_radius_max" value="SDT_chamber_radius_min"/>
<constant name="SDT_chamber_outer_wall_radius_min" value="SDT_chamber_radius_max"/>
<constant name="SDT_chamber_outer_wall_radius_max" value="SDT_chamber_radius_max+SDT_outer_wall_thickness"/>
<constant name="DC_Endcap_rmin" value="SDT_radius_min"/>
<constant name="DC_Endcap_rmax" value="SDT_radius_max"/>
</define>
<limits>
<limitset name="DC_limits">
<limit name="step_length_max" particles="*" value="10" unit="mm" />
</limitset>
</limits>
<regions>
<region name="DriftChamberRegion">
<limitsetref name="DC_limits"/>
</region>
</regions>
<detectors>
<detector id="DetID_DC" name="DriftChamber" type="DriftChamber" readout="DriftChamberHitsCollection" vis="DCVis" sensitive="true" insideTrackingVolume="true" limits="DC_limits">
<material name="Air"/>
<chamber id="0" material="GasHe_90Isob_10"/>
<side material="CarbonFiber"/>
<envelope>
<shape type="BooleanShape" operation="Union" material="Air">
<shape type="Tube" rmin="SDT_radius_min" rmax="SDT_radius_max" dz="SDT_half_length" />
</shape>
</envelope>
<module id="0" name="SignalWire" type="Tube" rmin="0*mm" rmax="0.01*mm" vis="RedVis">
<tubs name="W" type="Tube" rmin="0*mm" rmax="0.007*mm" material="Tungsten"/>
<tubs name="Au" type="Tube" rmin="0.007*mm" rmax="0.01*mm" material="Gold"/>
</module>
<module id="1" name="FieldWire" type="Tube" rmin="0*mm" rmax="0.02*mm" vis="GreenVis">
<tubs name="Al" type="Tube" rmin="0*mm" rmax="0.017*mm" material="Aluminum"/>
<tubs name="Ag" type="Tube" rmin="0.017*mm" rmax="0.02*mm" material="Silver"/>
</module>
<type_flags type="DetType_TRACKER + DetType_BARREL + DetType_GASEOUS + DetType_WIRE"/>
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
<sensitive type="SimpleDriftChamber"/>
</detector>
</detectors>
<readouts>
<readout name="DriftChamberHitsCollection">
<segmentation type="GridDriftChamber" cell_size="SDT_chamber_cell_width" detector_length="DC_length" identifier_phi="cellID" DC_rbegin="DC_chamber_layer_rbegin" DC_rend="DC_chamber_layer_rend" DC_rmin="SDT_chamber_radius_min" DC_rmax="SDT_chamber_radius_max" safe_distance="DC_safe_distance" layerID="layer" layer_width="SDT_chamber_layer_width"/>
<!-- <id>system:8,chamber:1,layer:8,cellID:16</id> -->
<id>system:5,layer:7:9,chamber:8,cellID:32:16</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/Ecal_Crystal_Barrel_Short_v02.xml 0 → 100644
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<define>
<constant name="ecalbarrel_inner_radius" value="Ecal_barrel_inner_radius"/>
<constant name="ecalbarrel_outer_radius" value="Ecal_barrel_outer_radius"/>
<!--<constant name="ecalbarrel_thickness" value="Ecal_barrel_thickness"/>-->
<constant name="ecalbarrel_thickness" value="28.5*cm"/>
<constant name="ecalbarrel_zlength" value="Ecal_barrel_half_length*2"/>
<constant name="Nmodule" value="32"/>
<constant name="Nblock_z" value="15"/>
<constant name="module_rotation" value="12*degree"/>
<constant name="crystal_r" value="4.1*cm"/>
<constant name="crystal_phi" value="1*cm"/>
<constant name="crystal_z_barrel" value="1*cm"/>
<constant name="esr_thickness_barrel" value="0.1*mm"/>
<constant name="sipm_r" value="0.8*mm"/>
<constant name="sipm_phi" value="3*mm"/>
<constant name="sipm_z_barrel" value="3*mm"/>
<constant name="pcb_thickness_barrel" value="2.2*mm"/>
<constant name="cu_thickness_barrel" value="1*mm"/>
<constant name="fibre_thickness_barrel" value="0.1*mm"/>
<constant name="collection_width" value="300*mm"/>
<constant name="collection_thickness" value="10*mm"/>
<constant name="boundary_safety_barrel" value="1*nm"/>
</define>
<regions>
<region name="EcalBarrelRegion">
</region>
</regions>
<detectors>
<detector id="DetID_ECAL"
name="EcalBarrel"
type="CRDEcalBarrel_Short_v02"
readout="EcalBarrelCollection"
vis="Invisible"
sensitive="true"
region="EcalBarrelRegion">
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
<material name="G4_BGO"/>
</detector>
</detectors>
<readouts>
<readout name="EcalBarrelCollection">
<segmentation type="NoSegmentation"/>
<!--segmentation type="CartesianGridXYZ"
grid_size_x="1*cm"
grid_size_y="1*cm"
grid_size_z="1*cm"/-->
<id>system:5,module:5,stave:4,layer:5,phi:6,z:6</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/Ecal_Crystal_Barrel_v01_01.xml
View file @ 835ccfde
......@@ -2,10 +2,13 @@
<lccdd>
<define>
<constant name="ecalbarrel_inner_radius" value="Ecal_barrel_inner_radius"/>
<constant name="ecalbarrel_thickness" value="Ecal_barrel_thickness"/> <!--Must be n*10*mm! -->
<constant name="ecalbarrel_zlength" value="Ecal_barrel_half_length*2"/> <!--Must be n*10*mm! -->
<constant name="bar_x" value="1*cm"/>
<constant name="bar_y" value="1*cm"/>
<constant name="ecalbarrel_thickness" value="Ecal_barrel_thickness"/> <!--Must be n*10*mm! -->
<constant name="ecalbarrel_zlength" value="Ecal_barrel_half_length*2"/> <!--Must be n*10*mm n*Nblock_z! -->
<constant name="n_symm" value="Ecal_barrel_symmetry" /> <!--Only support 8 and 12 now -->
<constant name="Nblock_z" value="11" />
<constant name="Nblock_phi" value="4" />
<constant name="bar_x" value="1*cm"/>
<constant name="bar_y" value="1*cm"/>
</define>
<regions>
......@@ -21,7 +24,7 @@
<readouts>
<readout name="EcalBarrelCollection">
<!-- <segmentation type="NoSegmentation"/> -->
<!--segmentation type="NoSegmentation"/-->
<!--segmentation type="CartesianGridXYZ"
grid_size_x="1*cm"
......
Detector/DetCRD/compact/CRD_common_v01/Ecal_Crystal_Barrel_v01_02.xml 0 → 100755
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<define>
<constant name="ecalbarrel_inner_radius" value="Ecal_barrel_inner_radius"/>
<constant name="ecalbarrel_outer_radius" value="Ecal_barrel_outer_radius"/>
<constant name="ecalbarrel_zlength" value="Ecal_barrel_half_length*2"/>
<constant name="ecalbarrel_layer" value="28" />
<constant name="ecalbarrel_phimodule_number" value="32" />
<constant name="ecalbarrel_Zmodule_number" value="15"/>
<constant name="ecalbarrel_module_ratation" value="12.*degree" />
<constant name="ecalbarrel_width_crystal" value="10.2*mm"/>
<constant name="ecalbarrel_crystal_wrapping" value="0.1*mm"/>
<constant name="ecalbarrel_length_photoelectronic" value="0.7*mm"/>
<constant name="ecalbarrel_width_photoelectronic" value="3*mm"/>
<constant name="ecalbarrel_length_carbon" value="5.*mm"/>
<constant name="ecalbarrel_length_cable" value="0.*mm"/>
<constant name="ecalbarrel_length_cooling" value="1.*mm"/>
<constant name="ecalbarrel_length_pcb" value="1.2*mm"/>
<constant name="ecalbarrel_length_asic" value="1.*mm"/>
<constant name="ecalbarrel_length_back" value="10.*mm"/>
</define>
<regions>
<region name="EcalBarrelRegion">
</region>
</regions>
<detectors>
<detector id="DetID_ECAL" name="EcalBarrel" type="LongCrystalBarBarrelCalorimeter32Polygon_v01" readout="EcalBarrelCollection" vis="Invisible" sensitive="true" region="EcalBarrelRegion">
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
</detector>
</detectors>
<readouts>
<readout name="EcalBarrelCollection">
<segmentation type="NoSegmentation"/>
<!--segmentation type="CartesianGridXYZ"
grid_size_x="1*cm"
grid_size_y="1*cm"
grid_size_z="1*cm"/-->
<id>system:5,module:5,stave:4,dlayer:5,slayer:6,bar:15</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/Ecal_Crystal_Barrel_v02_01.xml 0 → 100755
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<define>
<constant name="ecalbarrel_inner_radius" value="Ecal_barrel_inner_radius"/>
<constant name="ecalbarrel_outer_radius" value="Ecal_barrel_outer_radius"/>
<constant name="ecalbarrel_zlength" value="Ecal_barrel_half_length*2"/>
<constant name="ecalbarrel_layer" value="18" />
<constant name="ecalbarrel_phimodule_number" value="32" />
<constant name="ecalbarrel_Zmodule_number" value="15"/>
<constant name="ecalbarrel_module_ratation" value="12.*degree" />
<constant name="ecalbarrel_width_crystal" value="15.2*mm"/>
<constant name="ecalbarrel_crystal_wrapping" value="0.1*mm"/>
<constant name="ecalbarrel_length_photoelectronic" value="0.7*mm"/>
<constant name="ecalbarrel_width_photoelectronic" value="3*mm"/>
<constant name="ecalbarrel_length_carbon" value="5.*mm"/>
<constant name="ecalbarrel_length_cable" value="0.*mm"/>
<constant name="ecalbarrel_length_cooling" value="1.*mm"/>
<constant name="ecalbarrel_length_pcb" value="1.2*mm"/>
<constant name="ecalbarrel_length_asic" value="1.*mm"/>
<constant name="ecalbarrel_length_back" value="10.*mm"/>
</define>
<regions>
<region name="EcalBarrelRegion">
</region>
</regions>
<detectors>
<detector id="DetID_ECAL" name="EcalBarrel" type="LongCrystalBarBarrelCalorimeter32Polygon_v01" readout="EcalBarrelCollection" vis="Invisible" sensitive="true" region="EcalBarrelRegion">
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
</detector>
</detectors>
<readouts>
<readout name="EcalBarrelCollection">
<segmentation type="NoSegmentation"/>
<!--segmentation type="CartesianGridXYZ"
grid_size_x="1*cm"
grid_size_y="1*cm"
grid_size_z="1*cm"/-->
<id>system:5,module:5,stave:4,dlayer:5,slayer:6,bar:15</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/Ecal_Crystal_Barrel_v02_02.xml 0 → 100755
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<define>
<constant name="ecalbarrel_inner_radius" value="Ecal_barrel_inner_radius"/>
<constant name="ecalbarrel_outer_radius" value="Ecal_barrel_outer_radius"/>
<constant name="ecalbarrel_zlength" value="Ecal_barrel_half_length*2"/>
<constant name="ecalbarrel_24X0" value="268.8*mm"/>
<constant name="ecalbarrel_layer" value="18" />
<constant name="ecalbarrel_phimodule_number" value="32" />
<constant name="ecalbarrel_phimodule_number_display" value="32" />
<constant name="ecalbarrel_Zmodule_number" value="15"/>
<constant name="ecalbarrel_Zmodule_number_display" value="15"/>
<constant name="ecalbarrel_module_ratation" value="12.*degree" />
<constant name="ecalbarrel_width_crystal" value="15.2*mm"/>
<constant name="ecalbarrel_width_crystal_n" value="15.8*mm"/>
<constant name="ecalbarrel_size_crystal" value="15.2*mm"/>
<constant name="ecalbarrel_crystal_wrapping" value="0.1*mm"/>
<constant name="ecalbarrel_crystal_supportting" value="0.000001*mm"/>
<constant name="ecalbarrel_length_photoelectronic" value="0.699999*mm"/>
<constant name="ecalbarrel_width_photoelectronic" value="3*mm"/>
<constant name="ecalbarrel_length_carbon" value="2.5*mm"/>
<constant name="ecalbarrel_length_carbon_z" value="2.5*mm"/>
<constant name="ecalbarrel_length_cable" value="0.*mm"/>
<constant name="ecalbarrel_length_cooling" value="1.*mm"/>
<constant name="ecalbarrel_length_pcb" value="2*mm"/>
<constant name="ecalbarrel_length_asic" value="2*mm"/>
<constant name="ecalbarrel_length_back" value="12*mm"/>
</define>
<regions>
<region name="EcalBarrelRegion">
</region>
</regions>
<detectors>
<detector id="DetID_ECAL" name="EcalBarrel" type="LongCrystalBarBarrelCalorimeter32Polygon_v02" readout="EcalBarrelCollection" vis="Invisible" sensitive="true" region="EcalBarrelRegion">
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
</detector>
</detectors>
<readouts>
<readout name="EcalBarrelCollection">
<segmentation type="NoSegmentation"/>
<!--segmentation type="CartesianGridXYZ"
grid_size_x="1*cm"
grid_size_y="1*cm"
grid_size_z="1*cm"/-->
<id>system:5,module:5,stave:4,dlayer:5,slayer:6,bar:15</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/Ecal_Crystal_Endcap_Short_v01.xml 0 → 100644
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<define>
<constant name="ecalendcap_inner_radius" value="Ecal_endcap_inner_radius"/>
<constant name="ecalendcap_outer_radius" value="Ecal_endcap_outer_radius"/>
<constant name="ecalendcap_block_xy" value="350*mm"/>
<constant name="ecalendcap_thickness" value="Ecal_endcap_zmax-Ecal_endcap_zmin"/>
<constant name="ecalendcap_z" value="0.5*(Ecal_endcap_zmin+Ecal_endcap_zmax)"/>
<constant name="Nblock_xy" value="6"/>
<constant name="Nsectors" value="4"/>
<!-- Fill in the space at the corner-->
<constant name="ecalendcap_block_fill_rect_short" value="260*mm"/>
<constant name="ecalendcap_block_fill_sq1" value="180*mm"/>
<constant name="ecalendcap_block_fill_sq2" value="270*mm"/>
<constant name="Ncell_rect_short" value="26"/>
<constant name="Ncell_sq1_xy" value="18"/>
<constant name="Ncell_sq2_xy" value="27"/>
<constant name="gap_narrow" value="2*mm"/>
<constant name="gap_wide" value="10*mm"/>
<!-- CrystalXY = CellXY - 2 * BoundarySafety - 2 * ESRThickness-->
<!-- CrystalZ = CellZ - 2 * BoundarySafety - 2 * ESRThickness-->
<constant name="Ncell_xy" value="35"/>
<constant name="crystal_z_endcap" value="4.1*cm"/>
<constant name="esr_thickness_endcap" value="0.1*mm"/>
<constant name="sipm_x" value="3*mm"/>
<constant name="sipm_y" value="3*mm"/>
<constant name="sipm_z_endcap" value="0.8*mm"/>
<constant name="pcb_thickness_endcap" value="2.2*mm"/>
<constant name="cu_thickness_endcap" value="1*mm"/>
<constant name="fibre_thickness_endcap" value="0.1*mm"/>
<constant name="boundary_safety_endcap" value="1*nm"/>
</define>
<regions>
<region name="EcalEndcapsRegion">
</region>
</regions>
<detectors>
<detector id="DetID_ECAL_ENDCAP"
name="EcalEndcaps"
type="CRDEcalEndcap_Short_v01"
readout="EcalEndcapsCollection"
vis="Invisible"
sensitive="true"
region="EcalEndcapsRegion">
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
<material name="G4_BGO"/>
</detector>
</detectors>
<readouts>
<readout name="EcalEndcapsCollection">
<segmentation type="NoSegmentation"/>
<!--segmentation type="CartesianGridXYZ"
grid_size_x="1*cm"
grid_size_y="1*cm"
grid_size_z="1*cm"/-->
<id>system:5,module:3,stave:5,layer:5,x:6,y:6</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/Ecal_Crystal_Endcap_v01_01.xml 0 → 100755
View file @ 835ccfde
<?xml version="1.0" encoding="UTF-8"?>
<lccdd>
<define>
<constant name="ecalendcap_inner_radius" value="Ecal_endcap_inner_radius"/>
<constant name="ecalendcap_outer_radius" value="Ecal_endcap_outer_radius"/>
<constant name="ecalendcap_zmin" value="Ecal_endcap_zmin"/>
<constant name="ecalendcap_depth" value="Ecal_endcap_thickness"/>
<constant name="ecalendcap_layer" value="28" />
<constant name="ecalendcap_x_width" value="350*mm" />
<constant name="ecalendcap_y_width" value="350*mm" />
<constant name="ecalendcap_width_crystal" value="10.2*mm"/>
<constant name="ecalendcap_crystal_wrapping" value="0.1*mm"/>
<constant name="ecalendcap_length_photoelectronic" value="0.7*mm"/>
<constant name="ecalendcap_width_photoelectronic" value="3*mm"/>
<constant name="ecalendcap_length_carbon" value="2.5*mm"/>
<constant name="ecalendcap_length_cable" value="0.*mm"/>
<constant name="ecalendcap_length_cooling" value="1.*mm"/>
<constant name="ecalendcap_length_pcb" value="1.2*mm"/>
<constant name="ecalendcap_length_asic" value="1.*mm"/>
<constant name="ecalendcap_length_back" value="10.*mm"/>
</define>
<regions>
<region name="EcalendcapRegion">
</region>
</regions>
<detectors>
<detector id="DetID_ECAL_ENDCAP" name="EcalEndcaps" type="LongCrystalBarEndcapCalorimeter_v01" readout="EcalEndcapsCollection" vis="Invisible" sensitive="true" region="EcalendcapRegion">
<!-- Use cm as unit if you want to use Pandora for reconstruction -->
</detector>
</detectors>
<readouts>
<readout name="EcalEndcapsCollection">
<segmentation type="NoSegmentation"/>
<!--segmentation type="CartesianGridXYZ"
grid_size_x="1*cm"
grid_size_y="1*cm"
grid_size_z="1*cm"/-->
<id>system:5,module:1,stave:15,dlayer:5,slayer:1,bar:15</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/Ecal_Crystal_Endcap_v01_02.xml 0 → 100755
View file @ 835ccfde
<lccdd>
<define>
<!-- <constant name="Ecal_endcap_inner_radius" value="2.5*mm"/>
<constant name="Ecal_endcap_inner_radius" value="2.5*mm"/> -->
<constant name="Ecal_endcap_nlayers" value="28"/>
<constant name="Ecal_scintillator_thickness" value="10*mm"/>
<constant name="Ecal_deadarea_thickness" value="8.5*mm"/>
</define>
<detectors>
<detector id="DetID_ECAL_ENDCAP" name="EcalEndcap" type="LongCrystalBarEndcapCalorimeter_v02" readout="EcalEndcapsCollection" vis="CyanVis" calorimeterType="EMC_ENDCAP">
<comment>Electromagnetic Calorimeter Endcap</comment>
<envelope vis="SeeThrough">
<shape type="BooleanShape" operation="Subtraction" material="Air">
<shape type="BooleanShape" operation="Subtraction" material="Air">
<shape type="Tube" rmin="0.0" rmax="Ecal_endcap_outer_radius - env_safety" dz="Ecal_endcap_zmax"/> <!--there is a thin plane in envolop -->
<shape type="Tube" rmin="0.0" rmax="Ecal_endcap_outer_radius + env_safety" dz="Ecal_endcap_zmin"/>
</shape>
<shape type="Box" dx="Ecal_endcap_inner_radius" dy="Ecal_endcap_inner_radius" dz="Ecal_endcap_zmax + env_safety"/>
</shape>
<rotation x="0" y="0" z="0"/>
</envelope>
<type_flags type=" DetType_CALORIMETER + DetType_ENDCAP + DetType_EMC " />
<material name="CarbonFiber"/>
<dimensions numsides="Ecal_x_module" > <!-- 0:cube 1:isosceles trapezoid 2:right trapezoid -->
<dimensions id="1" module_type="0" module_number="3" x_offset="766.5*mm" y_offset="766.5*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="326*mm" dim_y="326*mm" dim_z="300*mm"/>
<dimensions id="2" module_type="0" module_number="2" x_offset="1067.5*mm" y_offset="1067.5*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="276*mm" dim_y="276*mm" dim_z="300*mm"/>
<dimensions id="3" module_type="0" module_number="1" x_offset="1304*mm" y_offset="1304*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="197*mm" dim_y="197*mm" dim_z="300*mm"/>
<dimensions id="4" module_type="1" module_number="4" x_offset="570.5*mm" y_offset="0*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="574*mm" dim_x2="495*mm" dim_y1="441*mm" dim_y2="441*mm" dim_z="300*mm" />
<dimensions id="7" module_type="4" module_number="4" x_offset="570.5*mm" y_offset="0*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="574*mm" dim_x2="495*mm" dim_y1="441*mm" dim_y2="441*mm" dim_z="300*mm" />
<dimensions id="5" module_type="2" module_number="4" x_offset="425.5*mm" y_offset="435*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="356*mm" dim_y1="356*mm" dim_y2="356*mm" dim_z="300*mm"/>
<dimensions id="8" module_type="5" module_number="4" x_offset="425.5*mm" y_offset="435*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="356*mm" dim_y1="356*mm" dim_y2="356*mm" dim_z="300*mm"/>
<dimensions id="6" module_type="3" module_number="1" x_offset="425.5*mm" y_offset="425.5*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178*mm" dim_y="140*mm" dim_z="300*mm"/>
<dimensions id="9" module_type="6" module_number="1" x_offset="425.5*mm" y_offset="425.5*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178*mm" dim_y="140*mm" dim_z="300*mm"/>
<dimensions id="10" module_type="7" module_number="1" x_offset="425.5*mm" y_offset="425.5*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178*mm" dim_y="140*mm" dim_z="300*mm"/>
<dimensions id="11" module_type="8" module_number="1" x_offset="425.5*mm" y_offset="425.5*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178*mm" dim_y="140*mm" dim_z="300*mm"/>
<!-- 425.5 -->
</dimensions>
<layer repeat="Ecal_endcap_nlayers" vis="CyanVis" material="G4_BGO" thickness = "Ecal_scintillator_thickness">
<slice material="G4_BGO" thickness = "Ecal_scintillator_thickness" sensitive = "yes" limits="cal_limits" vis="CyanVis" />
</layer>
</detector>
</detectors>
<readouts>
<readout name="EcalEndcapsCollection">
<segmentation type="NoSegmentation"/>
<id>system:5,module:1,part:7,stave:7,type:4,dlayer:4,slayer:1,bar:7</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/Ecal_Crystal_Endcap_v01_03.xml 0 → 100755
View file @ 835ccfde
<lccdd>
<define>
<!-- <constant name="Ecal_endcap_inner_radius" value="2.5*mm"/>
<constant name="Ecal_endcap_inner_radius" value="2.5*mm"/> -->
<constant name="Ecal_endcap_nlayers" value="28"/>
<constant name="Ecal_scintillator_thickness" value="10*mm"/>
<constant name="Ecal_deadarea_thickness" value="8.5*mm"/>
<constant name="Ecal_module_safety" value="0.5*mm"/>
</define>
<detectors>
<detector id="DetID_ECAL_ENDCAP" name="EcalEndcap" type="LongCrystalBarEndcapCalorimeter_v03" readout="EcalEndcapsCollection" vis="CyanVis" calorimeterType="EMC_ENDCAP">
<comment>Electromagnetic Calorimeter Endcap</comment>
<envelope vis="SeeThrough">
<shape type="BooleanShape" operation="Subtraction" material="Air">
<shape type="BooleanShape" operation="Subtraction" material="Air">
<!-- <shape type="Tube" rmin="0.0" rmax="Ecal_endcap_outer_radius - env_safety" dz="Ecal_endcap_zmax"/> -->
<!--there is a thin plane in envolop -->
<!-- <shape type="Tube" rmin="0.0" rmax="Ecal_endcap_outer_radius + env_safety" dz="Ecal_endcap_zmin"/> -->
<shape type="PolyhedraRegular" numsides="256" rmin="0.0" rmax="Hcal_barrel_inner_radius - 5*mm" dz="Ecal_endcap_zmax*2"/>
<shape type="PolyhedraRegular" numsides="256" rmin="0.0" rmax="Hcal_barrel_inner_radius - 5*mm" dz="Ecal_endcap_zmin*2"/>
</shape>
<!-- <shape type="Box" dx="Ecal_endcap_inner_radius" dy="Ecal_endcap_inner_radius" dz="Ecal_endcap_zmax + env_safety"/> -->
<shape type="Tube" rmin="0.0" rmax="Ecal_endcap_inner_radius" dz="Ecal_endcap_zmax + env_safety"/>
</shape>
<rotation x="0" y="0" z="0"/>
<!-- <rotation x="0" y="0" z="11.25"/> -->
</envelope>
<type_flags type=" DetType_CALORIMETER + DetType_ENDCAP + DetType_EMC " />
<material name="CarbonFiber"/>
<dimensions numsides="Ecal_x_module" > <!-- 0:cube 1:isosceles trapezoid 2:right trapezoid -->
<dimensions id="0" module_type="0" module_number="3" x_offset="768*mm" y_offset="768*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="326*mm" dim_y="326*mm" dim_z="300*mm"/>
<dimensions id="1" module_type="0" module_number="2" x_offset="1069*mm" y_offset="1069*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="276*mm" dim_y="276*mm" dim_z="300*mm"/>
<dimensions id="2" module_type="0" module_number="1" x_offset="1305.5*mm" y_offset="1305.5*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="197*mm" dim_y="197*mm" dim_z="300*mm"/>
<dimensions id="0" module_type="20" module_number="3" x_offset="768*mm" y_offset="768*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="326*mm" dim_y="326*mm" dim_z="300*mm"/>
<dimensions id="1" module_type="20" module_number="2" x_offset="1069*mm" y_offset="1069*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="276*mm" dim_y="276*mm" dim_z="300*mm"/>
<dimensions id="2" module_type="20" module_number="1" x_offset="1305.5*mm" y_offset="1305.5*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="197*mm" dim_y="197*mm" dim_z="300*mm"/>
<dimensions id="3" module_type="1" module_number="4" x_offset="570.5*mm" y_offset="0*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="574*mm" dim_x2="495*mm" dim_y1="441*mm" dim_y2="441*mm" dim_z="300*mm" />
<dimensions id="4" module_type="2" module_number="4" x_offset="570.5*mm" y_offset="0*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="574*mm" dim_x2="495*mm" dim_y1="441*mm" dim_y2="441*mm" dim_z="300*mm" />
<dimensions id="3" module_type="21" module_number="4" x_offset="570.5*mm" y_offset="0*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="574*mm" dim_x2="495*mm" dim_y1="441*mm" dim_y2="441*mm" dim_z="300*mm" />
<dimensions id="4" module_type="22" module_number="4" x_offset="570.5*mm" y_offset="0*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="574*mm" dim_x2="495*mm" dim_y1="441*mm" dim_y2="441*mm" dim_z="300*mm" />
<dimensions id="5" module_type="3" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="6" module_type="4" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="7" module_type="5" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="8" module_type="6" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="9" module_type="7" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="10" module_type="8" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="11" module_type="9" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="12" module_type="10" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="13" module_type="11" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="14" module_type="12" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="15" module_type="13" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="16" module_type="14" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="17" module_type="15" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="18" module_type="16" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="19" module_type="17" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="20" module_type="18" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
</dimensions>
<layer repeat="Ecal_endcap_nlayers" vis="CyanVis" material="G4_BGO" thickness = "Ecal_scintillator_thickness">
<slice material="G4_BGO" thickness = "Ecal_scintillator_thickness" sensitive = "yes" limits="cal_limits" vis="CyanVis" />
</layer>
</detector>
</detectors>
<readouts>
<readout name="EcalEndcapsCollection">
<segmentation type="NoSegmentation"/>
<id>system:5,module:1,part:7,stave:7,type:4,dlayer:4,slayer:1,bar:7</id>
</readout>
</readouts>
</lccdd>
Detector/DetCRD/compact/CRD_common_v01/Ecal_Crystal_Endcap_v02_01.xml 0 → 100755
View file @ 835ccfde
<lccdd>
<define>
<constant name="Ecal_endcap_nlayers" value="18"/>
<constant name="Ecal_scintillator_thickness" value="15*mm"/>
<constant name="Ecal_deadarea_thickness" value="8.5*mm"/>
</define>
<detectors>
<detector id="DetID_ECAL_ENDCAP" name="EcalEndcap" type="LongCrystalBarEndcapCalorimeter_v03" readout="EcalEndcapsCollection" vis="CyanVis" calorimeterType="EMC_ENDCAP">
<comment>Electromagnetic Calorimeter Endcap</comment>
<envelope vis="SeeThrough">
<shape type="BooleanShape" operation="Subtraction" material="Air">
<shape type="BooleanShape" operation="Subtraction" material="Air">
<!-- <shape type="Tube" rmin="0.0" rmax="Ecal_endcap_outer_radius - env_safety" dz="Ecal_endcap_zmax"/> -->
<!--there is a thin plane in envolop -->
<!-- <shape type="Tube" rmin="0.0" rmax="Ecal_endcap_outer_radius + env_safety" dz="Ecal_endcap_zmin"/> -->
<shape type="PolyhedraRegular" numsides="256" rmin="0.0" rmax="Hcal_barrel_inner_radius - 5*mm" dz="Ecal_endcap_zmax*2"/>
<shape type="PolyhedraRegular" numsides="256" rmin="0.0" rmax="Hcal_barrel_inner_radius - 5*mm" dz="Ecal_endcap_zmin*2"/>
</shape>
<!-- <shape type="Box" dx="Ecal_endcap_inner_radius" dy="Ecal_endcap_inner_radius" dz="Ecal_endcap_zmax + env_safety"/> -->
<shape type="Tube" rmin="0.0" rmax="Ecal_endcap_inner_radius" dz="Ecal_endcap_zmax + env_safety"/>
</shape>
<rotation x="0" y="0" z="0"/>
</envelope>
<type_flags type=" DetType_CALORIMETER + DetType_ENDCAP + DetType_EMC " />
<material name="CarbonFiber"/>
<dimensions numsides="Ecal_x_module" > <!-- 0:cube 1:isosceles trapezoid 2:right trapezoid -->
<dimensions id="0" module_type="0" module_number="3" x_offset="768*mm" y_offset="768*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="326*mm" dim_y="326*mm" dim_z="300*mm"/>
<dimensions id="1" module_type="0" module_number="2" x_offset="1069*mm" y_offset="1069*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="276*mm" dim_y="276*mm" dim_z="300*mm"/>
<dimensions id="2" module_type="0" module_number="1" x_offset="1305.5*mm" y_offset="1305.5*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="197*mm" dim_y="197*mm" dim_z="300*mm"/>
<dimensions id="0" module_type="20" module_number="3" x_offset="768*mm" y_offset="768*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="326*mm" dim_y="326*mm" dim_z="300*mm"/>
<dimensions id="1" module_type="20" module_number="2" x_offset="1069*mm" y_offset="1069*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="276*mm" dim_y="276*mm" dim_z="300*mm"/>
<dimensions id="2" module_type="20" module_number="1" x_offset="1305.5*mm" y_offset="1305.5*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="197*mm" dim_y="197*mm" dim_z="300*mm"/>
<dimensions id="3" module_type="1" module_number="4" x_offset="570.5*mm" y_offset="0*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="574*mm" dim_x2="495*mm" dim_y1="441*mm" dim_y2="441*mm" dim_z="300*mm" />
<dimensions id="4" module_type="2" module_number="4" x_offset="570.5*mm" y_offset="0*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="574*mm" dim_x2="495*mm" dim_y1="441*mm" dim_y2="441*mm" dim_z="300*mm" />
<dimensions id="3" module_type="21" module_number="4" x_offset="570.5*mm" y_offset="0*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="574*mm" dim_x2="495*mm" dim_y1="441*mm" dim_y2="441*mm" dim_z="300*mm" />
<dimensions id="4" module_type="22" module_number="4" x_offset="570.5*mm" y_offset="0*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="574*mm" dim_x2="495*mm" dim_y1="441*mm" dim_y2="441*mm" dim_z="300*mm" />
<dimensions id="5" module_type="3" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="6" module_type="4" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="7" module_type="5" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="8" module_type="6" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="9" module_type="7" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="10" module_type="8" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="11" module_type="9" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="12" module_type="10" module_number="4" x_offset="426.25*mm" y_offset="436.125*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x1="318*mm" dim_x2="357.5*mm" dim_y1="357.5*mm" dim_y2="357.5*mm" dim_z="300*mm"/>
<dimensions id="13" module_type="11" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="14" module_type="12" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="15" module_type="13" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="16" module_type="14" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="17" module_type="15" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="18" module_type="16" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="19" module_type="17" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
<dimensions id="20" module_type="18" module_number="1" x_offset="426.25*mm" y_offset="426.25*mm" z_offset="Ecal_endcap_zmin+Ecal_endcap_thickness/2" dim_x="178.75*mm" dim_y="139.25*mm" dim_z="300*mm"/>
</dimensions>
<layer repeat="Ecal_endcap_nlayers" vis="CyanVis" material="G4_BGO" thickness = "Ecal_scintillator_thickness">
<slice material="G4_BGO" thickness = "Ecal_scintillator_thickness" sensitive = "yes" limits="cal_limits" vis="CyanVis" />
</layer>
</detector>
</detectors>
<readouts>
<readout name="EcalEndcapsCollection">
<segmentation type="NoSegmentation"/>
<id>system:5,module:1,part:7,stave:7,type:4,dlayer:4,slayer:1,bar:7</id>
</readout>
</readouts>
</lccdd>